#935 MICRO-FIBERS

Surface to receive coating must be clean, smooth, dry, and paintable. Any debris, gravel, dust, and silt must be removed prior to application.

It is very important that this product is not used when weather conditions are below 50ºF, or when there is a chance that temperatures could fall below 32ºF within a 24 hour period after application. We also do not recommend application of this product if rain or dew is likely to occur before curing of product.

Easily mixed in with hand tools at a ratio of 20%-50%. Addition of #935 Micro-Fibers to silicone will shorten pot life. Do not add more than one hour in advance. Do not mix more than you will use during one working period.

This product may be mixed with coating which contain flammable solvents and is designed for professional installation. Caution should be exercised to prevent mishap due to improper handling. The use of an appropriate MESA/NIOSH approved respirator during application is important. We also recommend the use of fabric coveralls and neoprene or other resistant gloves. Installers should use caution during spray processes to avoid falls caused by slipping on wet primer. Installers should read and understand all technical and informational literature on this product, including the Safety Data Sheet, prior to using this product.

Sweep or vacuum dry fibers.