#932 POLYESTER REINFORCING FABRIC

• Heavy-duty Stitch Bonded High Performance Fabric
• For Use in Cold Applied Restoration Roofing and Roof Maintenance Systems
• Increases Tear Strength, Puncture Resistance and Tensile Strength
• Easier to Work with than Softer Polyester Fabrics
• Can Be Used with Asphalt Emulsions, Acrylic Coatings and Mastics, Silicone Coatings and Mastics and Solvent Based Coatings

Follow the directions on the material being used with #932 for proper preparation of the surface.

#932 is highly recommended for reinforcing #360 Asphalt Emulsion, #363 Fibered Asphalt Emulsion, #365 Modified Asphalt Emulsion, and #367 Neoprene Modified Asphalt Emulsion.

Over the properly prepared surface, apply a coat of #360 Asphalt Emulsion at a rate of 6 gallons per 100square foot. Immediately following and starting at the low edge of the roof, embed full width of #932 Polyester Reinforcing Fabric continuing up the roof with full-width sheets stopping6”abovetheCantStrip. Do not walk on the polyester during application while emulsion is still wet causing displacement of the Emulsion. Do not apply a top coat of #360 Asphalt Emulsion to the polyester. Allow for proper curingtime24-72hours weather dependent. Rinse the #360 Asphalt Emulsion removing any light oils.

Apply at the rate of approximately 4-12 gallons per 100 square feet per coat as a topical protective coating and 6-8 gallons total for restoration systems.

Use gloves and other protective clothing when working with this material.

#932 is a dry fabric and as such only picking up of pieces and left over material is needed.