#921 REFLEX ELASTOMERIC ROOF COATING

Product Description

#921 Reflex Elastomeric Roof Coating is an elastomeric coating that forms a seamless and flexible layer of protection for your roof and is designed to dramatically reduce interior temperatures. Formulated to provide a tough, durable weather resistant coating. Flexible, fast drying, elastomeric coating adheres readily to most roofing substrates. Significant degree of flexibility gives the coating the ability to expand and contract with the movement on the roof. Resistant to mold and mildew.

Application Methods

Application rates will vary by surface, porosity, and job conditions.

Available

Available Standard Colors

Color swatches are representative. Actual coating sample provided for approval. Custom colors available upon request with a 600 gallon minimum.

Data sheets

Physical Properties

Features + Benefits

Preparation

Surface must be clean and dry, free of moisture both on and beneath the surface. Pressure wash roof thoroughly to remove as much dust, dirt, and debris as possible. After careful inspection of entire roof, repair all holes, cracks, tears or breaks with reinforcing fabric and #950 Eternamastic. #950 Eternamastic repairs can usually be coated within24 hours. Coat newlyapplied asphalt emulsions soon as the emulsion can take foot traffic without scuffing the surface, normally7–10days.

Application

Apply on warm, sunny days, preferably in the morning hours to provide maximum cure time. #921 can be applied to a dry or slightly damp, but not wet, surface. Water must be swept out of all puddles prior to application of #921. Stir #921 thoroughly before application to achieve a uniform consistency. Apply with a heavy-duty paint roller or heavy duty spray equipment. When applied with roller or brush, strokes should be kept in one direction. Apply second coat perpendicular to the first. Allow at least four hours between coats and 24–48 hours for full cure, dependent upon weather conditions. Relative humidity will directly affect drying/curing time. Avoid over application.

Coverage

Precautions

DDO NOT APPLYIF TEMPERATUREISBELOW 50° F OR ABOVE 110°F. DO NOT APPLY IF THEREIS A THREAT OFRAIN OR DEW WITHIN 48–72 HOURS. DO NOT ALLOW TO FREEZE. DO NOT THIN. DO NOT HEAT CONTAINER or store at temperatures greater than 120°F. Be sure the lid is tight and the pail is secured when transporting this product. Do not allow pail to tumble as this may loosen the lid and allow leak- age or spillage to occur. This coating is not recommended for areas with inadequate drainage (ponding water),over gravel, over walking decks, or old roofs that are too brittle and dry. DO NOT APPLY TO FLAT SURFACES WITH POOR DRAINAGE OR WHERE PONDING WATER WILL EXIST.

Cleanup

Package Sizes

Shipping Information

V.O.C.	<49 g/L
Solar Reflectivity	.84
Weight	10 lbs./gal
Solids by Weight	64%
Solids by Volume	49%

CONTAINER SIZE	CLASS
5 Gal.	55
55 Gal	5