#101 ALL WEATHER PLASTIC CEMENT

• Multi-Purpose Asphaltic-Based Plastic Roof Cement
• Adheres and Spreads Easilyto All Prepared Surfaces
• Homogeneous Blend of High-Grade Fibers, Select Asphalt, Minerals, Plasticizers and Aromatic Hydrocarbons

Surface must be clean and free from rust or any other foreign matter that would interfere with a good bond. Remove rust with a wire brush. For best results in cold weather, store at room temperature for 24 hours prior to application.

Use a trowel, putty knife or gloved hand to repair cracks, tears, holes, and breaks by applying cement 1/8“ to 1/4” thick. Apply and work cement into break or crack, then apply cement 2”–4” beyond the problem area feathering the edges. Embed glass fabric to reinforce cement, then cover with additional cement, if problem area is over 1/4” wide or 2” long

Apply at a minimum rate of 20 linear feet per gallon with 4” wide 1/8” thick application. Apply with a trowel or knife.

Clean tools with mineral spirits or paint thinner.

DO NOT ALLOW TO FREEZE. DO NOT THIN. DO NOT HEAT CONTAINER or store at temperatures greater than 120° F. Be sure lid is tight and pail is secure when transporting this product. Do not allow pail to tumble as this may loosen the lid and allow leakage to occur.

D.O.T. Classification: Roof Coating, Not Regulated NFMC #170080